PanagiotisCharalampous
08 Oct 2019, 08:25

Hi donbona,

Thanks for posting in our forum. No, this is not possible. Sub accounts cannot become strategy providers.

Best Regards,

Panagiotis

PanagiotisCharalampous
08 Oct 2019, 08:24

Hi Carlos,

The account balance is shown on the Account Information Bar.

Best Regards,

Panagiotis

PanagiotisCharalampous
08 Oct 2019, 08:22

Hi zedodia,

You can use a flag and put the logic in OnTick or OnBar. The flag should be initialized to false and the condition checked on each tick/bar. If the condition is met set the flag to true. Execute the rest of the logic only if the flag is true.

Best Regards,

Panagiotis

PanagiotisCharalampous
08 Oct 2019, 08:19

Hi GoldnOil750,

The issue usually occurs when a lot of drawings remain on the chart, usually forgotten from another setup. We usually ask for the settings file to confirm this. In case such a behavior occurs again, just make sure there are no forgotten drawings on the chart.

Best Regards,

Panagiotis

PanagiotisCharalampous
08 Oct 2019, 08:16

Hi spasemansikorski,

Thanks for posting your suggestion. Please use the Suggestions section to post your suggestions. Also note that such an indicator can be easily developed using cTrader Automate.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 14:19

Hi ctid712216,

You have posted your cTID but I also need your trading account number. Then we will have a look at this. Note that we do not provide official support to traders therefore you should not expect a reply from any other channel than the forum.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 12:15

Hi Sander,

Thanks for posting in our forum. Range and Renko bars are not available yet in cTrader Web. They are planned for a future update of the platform. Stay tuned!

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 11:58

Hi GoldnOil750,

Thanks. Can you also send us your settings file at community@spotware.com? You can find it at C:\Users\UserName\AppData\Roaming\broker cTrader\Settings.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 11:39

Hi drayzen,

There is no shudown date for cMirror at the moment.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 10:03

Hi Chris,

I can email you several example posMaintRptID's if this helps.

Yes, please. 

Best Regards,

Panagiotis 

PanagiotisCharalampous
07 Oct 2019, 10:01

Hi drayzen,

cTrader Copy is more of an investment platform rather than a copying service. In cTrader Copy, you invest an amount in a strategy and let the strategy provider manage your funds in the same fashion as would happen if you have invested your money in e.g. a mutual or a hedge fund. It is your responsibility to choose the person that will manage your money wisely. If you need a platform with more flexibility and control over the copying procedure, cMirror is still available.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:28

Hi drayzen,

We have plans to add cTrader Copy in desktop and mobile in the future. However, it is not clear for which reasons you think it is limited. Could you please explain?

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:24

Hi FireMyst,

There isn't a way at the moment.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:21

Hi felipefucsm,

Thanks for posting in our forum. BetterTrader signals are not available in cTrader but as far as we know BetterTrader has integrated with cTrader using Open API, meaning that you should be able to use your cTrader account with your BetterTrader application. However you should contact them for more information.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:17

Hi jcr1818@gmail.com,

Such indicators can be programmed in cTrader Automate. If you cannot do it yourself, you can always contact a Consultant or post a Job and somebody can develop this for you.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:12

Hi Jonathan,

Thanks for posting in our forum. Please use the Suggestions section for such suggestions so that we can keep track of then and they are managed properly.

Best Regards,

Panagiotis 

PanagiotisCharalampous
07 Oct 2019, 09:10

Hi Peter,

Thanks for posting in our forum. All symbols have PipSize, a PipValue and a LotSize property. The pip value is the value of a pip in the account's balance currency for each unit. Combining this with the pip size and the LotSize, you can get the value you are looking for. The equation should be the below

Lot Trade Value = PipValue / PipSize * LotSize.

Let me know if this helps you.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 09:02

Hi Johan,

There is no built in functionality to do this but you can always use the snipping tool available in Windows.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 08:59

Hi Steve,

If you have closed the chart then there is no way to get it back. I will suggest to the product team for a confirmation on closing a chart that includes objects on it.

Best Regards,

Panagiotis

PanagiotisCharalampous
07 Oct 2019, 08:56

Hi Chris,

posMaintRptID should be unique for each position. Can you please explain to us why do you think it is not unique? 

Best Regards,

Panagiotis