PanagiotisCharalampous
10 Jun 2020, 10:15

Hi Yuval,

We will need a complete cBot code to check this further. Regarding your question, there is no limitation for Bars.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
10 Jun 2020, 08:34

Hi giuseppealessiof,

You need to provide more details like the cBot code and baclktesting parameters and dates so that we can reproduce this behavior and advise accordingly.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
10 Jun 2020, 08:32

Hi ericjavier.santiago,

In principle it is possible but the code needs to be modified accordingly.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
10 Jun 2020, 08:30

Hi iucpxleps,

You should consider a flag that will be set to true when the conditions become valid and the position is partially closed and set back to false when the MA crosses on the opposite site. Modify the position only when the flag is false.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
10 Jun 2020, 08:26

Hi Yuval,

Please provide more information on how to reproduce this problem.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 15:44

Ηι robustby,

We investigated this issue further. You have three live accounts following you but none of them was able to follow your last trades due to a higher minimum volume requirement at their broker therefore you did not receive any commissions.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 15:27

Hi iucpxleps,

The investigation has shown that your connection is slow causing frequent disconnections.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 15:26

Hi Santo,

This error usually happens when the installed version of Windows doesn't have some files needed to decrypt a manifest signature. Usually this happens on old versions of Windows. We recommend to try fixing missing/corrupted Windows system files by following the instructions in this guide.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 15:13

Hi there,

You can find all the information you need about backtesting cBots here.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 12:20

Hi edgarismaelei203,

Can you provide a link to the thread?

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:56

Hi shapebubble,

The error will be fixed in an upcoming update. If you still face issues with the results, you should report it to your vendor and if this is an issue with cTrader they should contact us directly.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:39

Hi imsolihGMail,

You can use Workspaces to do this.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:36

Hi iucpxleps,

We have received your troubleshooting information and we are investigating.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:34

Ηι robustby,

You need to provide more information How do you know that these copiers are not copying your trades? What commission would you expect to get? Why do you say that they are demo copiers but displayed as live? 

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:28

Hi YrpWayne,

Did you try subscribing to the Bars.Tick() event?

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:25

Hi Santo,

Please try a clean installation and let us know if this resolves the issue.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 10:01

Hi shapebubble,

To be able to investigate this issue you will need to provide us with the cBot code and exact steps to reproduce this behavior (Optimization settings and dates, selected backtesting parameters etc).

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 09:56

Hi there,

Can you provide us the cBot code you are using to check this?

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 09:50 ( Updated at: 21 Dec 2023, 09:22 )

Hi zenirofx,

Please make sure cTrader is focused. You should get the following window.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
09 Jun 2020, 09:48

Hi cesafat,

You can consider posting a Job or contacting a Consultant to help you.

Best Regards,

Panagiotis 

Join us on Telegram