PanagiotisCharalampous
03 Dec 2020, 08:40

Hi ace6670,

If you received these messages, it means that your stop out margin level was reached and positions had to be closed to restore your margin level.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
03 Dec 2020, 08:33

Hi hgrams,

No this is not possible at the moment.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 14:49

Hi web_wizard_chris,

Unfortunately I cannot help you. If you manage to reach out to the developer, he might be able to help you further.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 14:47

Hi m.creku,

As I explained above, these deals might have been executed because some positions were closed due to stop out. Did you check this with your broker? Smart stop out does not close all positions if not necessary but only the part required to restore the margin. There are also other reasons that could cause deals being different between the strategy provider and the follower. You can check some here.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 14:41

Hi uwescheffold,

Yes I know but I do not understand what is the point of your comment. I am explaining to you the possible ways to do what you are looking for.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 11:59

Hi uwescheffold,

OnStop()  was just an example. If you need access to GetFitnessArgs then you can do the export inside the GetFitness() method.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 11:55

Hi m.creku,

The stop loss is not relevant to the stop out. Based on your screenshots, your margin level is at 96.47% even after the positions were closed. This is why I guess that this is what happened.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 11:07

Hi web_wizard_chris,

Try this indicator. It might help you.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 10:13

Hi uwescheffold,

What duketv is implying is that you can write this code in your cBot e.g. in OnStop() function. If it is a one hour job as you say, then it should not be so hard.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 09:53

Hi m.creku,

At a first glance, it seems like a stop out due to margin requirements. Your margin level seems very low. Did you check this with your broker?

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 09:15

Hi theFXlonglunch,

This was a feedback-driven change. We removed the selector from each chart after numerous traders pointed out that it was taking too much space. So not everybody shares the same opinion with you. We understand that every trader has different needs but unfortunately we cannot please everybody, since individual needs are often contradicting.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 08:52

Hi parkermark446,

Can you be a bit more specific on what is the information you are missing on how to achieve this. What kind of help do you need exactly?

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 08:49

Hi Kieran,

Please explain to us here why do you think there is a discrepancy and will investigate it. Please provide all necessary information, like a step by step explanation of your calculations, the strategy name, your account number, your broker and any screenshots that might help us understand better the problem.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 08:43

Hi web_wizard_chris,

It is not clear what are you looking for. Do you want copy objects between different open charts? Do you want the objects to appear on different timeframes on the same chart? Or do you want to simultaneously draw the same object on two different charts? Please clarify so that we can help you.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
02 Dec 2020, 08:39

Hi dinodelides,

It is not possible to backtest two strategies at the same time. To achieve this, you will need to merge the two strategies into a single cBot.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
01 Dec 2020, 08:47

Hi firemyst,

No that is not possible.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
01 Dec 2020, 08:44

Hi nunesb,

Profanity is not allowed in this forum. You can express your opinion in a more civilized manner. I have unblocked your account but next time it will be permanent.

Best Regards,

Panagiotis 

Join us on Telegram  

PanagiotisCharalampous
01 Dec 2020, 08:29

Hi demiancarvalho,

Just right click on the chart and select Viewing Options > Tick Volume.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
01 Dec 2020, 08:25

Hi theFXlonglunch,

Thanks for your posting your feedback regarding the new release. It has been forwarded to the product team. Releasing the new version on Spotware Beta before releasing to brokers is what you are actually proposing, testing the new version with traders.

Best Regards,

Panagiotis 

Join us on Telegram

PanagiotisCharalampous
30 Nov 2020, 16:09

Hi Schaitan,

I could not reproduce the reported issue. Please let us know your broker, the symbol and the data sources (ticks, m1 bars etc)

Best Regards,

Panagiotis 

Join us on Telegram