Messing up indicator values in the backtest section
06 Jul 2024, 07:39
In the backtest section, when I add the Keltner Channel indicator, before starting the backtest, the indicator values are correct, but a little after the start, the indicator values are messed up and the distance of the indicator opening is very small. What is the problem? This problem occurred after the last update.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Hi there,
Yes I am. We cannot provide an ETA unfortunately. As soon as it is ready and tested, it will be released.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Hi there,
Yes I am. We cannot provide an ETA unfortunately. As soon as it is ready and tested, it will be released.
Best regards,
Panagiotis
Hi
Today we had a new update, but the problem is not solved yet.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Hi there,
Yes I am. We cannot provide an ETA unfortunately. As soon as it is ready and tested, it will be released.
Best regards,
Panagiotis
Hi
Today we had a new update, but the problem is not solved yet.
Hi there,
The fix for this issue is not included in the latest update.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Hi there,
Yes I am. We cannot provide an ETA unfortunately. As soon as it is ready and tested, it will be released.
Best regards,
Panagiotis
Hi
Today we had a new update, but the problem is not solved yet.
Hi there,
The fix for this issue is not included in the latest update.
Best regards,
Panagiotis
Hi there
More than a month has passed since the announcement of this problem, but the problem has not been solved yet. How long do you think it will take for an update to solve this problem? I want to know that if it takes a long time, I should spend time and try other indicators or write a similar indicator myself so that I can restart my robot.
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
Hi
You can also test yourself in the backtest section; Add the Keltner Channels indicator and you will see that before starting each robot; The opening of the indicator is, for example, 50 pips away, but immediately after the start of the robot and the revelation of new candles; The opening of the indicator will quickly get closer to each other and it will show, for example, a distance of 5 pips. Photo 1 that I have attached is before the start of the robot and photo 2 shows shortly after the start of the robot. The same problem caused the robot that I wrote earlier based on this indicator and it worked correctly; It is now disabled after the recent update. I tried some similar indicators but they did not have this problem.
Thank you. We managed to reproduce this behavior and we will fix it in an upcoming update.
Thank you for your attention. Are you a member of the Ctrader technical team? How long does it take to provide the new update?
Hi there,
Yes I am. We cannot provide an ETA unfortunately. As soon as it is ready and tested, it will be released.
Best regards,
Panagiotis
Hi
Today we had a new update, but the problem is not solved yet.
Hi there,
The fix for this issue is not included in the latest update.
Best regards,
Panagiotis
Hi there
More than a month has passed since the announcement of this problem, but the problem has not been solved yet. How long do you think it will take for an update to solve this problem? I want to know that if it takes a long time, I should spend time and try other indicators or write a similar indicator myself so that I can restart my robot.
Best Regards
Hi,
It will be fixed in v5.1, however there is no ETA at the moment.
mahinpour
09 Dec 2024, 09:25
( Updated at: 09 Dec 2024, 12:41 )
RE: RE: RE: RE: RE: RE: RE: RE: RE: Messing up indicator values in the backtest section
Thank you and your colleagues for your attention and follow-up. This problem was solved, but there is a new problem that I mentioned in this post. Please solve this problem too.
PanagiotisCharalampous
07 Jul 2024, 06:02
Hi there,
Can you please provide more information about this issue e.g. steps to reproduce and some screenshots demonstrating what you are looking at?
Best regards,
Panagiotis
@PanagiotisCharalampous