Description
The robot is based on different GannHighLow Indicators. If the GannHighLow Indicator crosses above or below MarketSeries and two SimpleMovingAverages are rising or falling a signal is given. Two other Indicators ChaikinMoneyFlow and MomentumOscillator or MoneyFlowIndex and MomentumOscillator support the signal.
The robot is fully automated and can run all over the week. There are no times to notice.
The robot is for one currency pair only. It is the same as the robot name.
The robot works only with a timeframe of 1h.
The robot doesn’t make many trades. There will be about 4 or 5 trades monthly.
All parameters are optimized. The parameters are marked with Buy or Sell to optimize the robots if you feel it’s necessary.
The robot has been created by me - called Mountain Trading Solutions - and you can use it for free. I also have created robots for further 8 currency pairs. If you are interested in contact me mountain.friend@outlook.de. I will send you the files of the robots and the indicators per email. New versions of the robots with an increased number of trades are planned.
// -------------------------------------------------------------------------------
//
//
//
// -------------------------------------------------------------------------------
using System;
using cAlgo.API;
using cAlgo.API.Requests;
using cAlgo.API.Indicators;
using cAlgo.Indicators;
namespace cAlgo.Robots
{
[Robot(TimeZone = TimeZones.UTC, AccessRights = AccessRights.None)]
public class EURUSD2 : Robot
{
private GHLsmawws _GHLsmawwsIndicator;
private GHLsmawws2 _GHLsmawws2Indicator;
private GannHighLowwws _gannHighLowwwsIndicator;
private GannHighLowwws1 _gannHighLowwws1Indicator;
private GannHighLowtri _gannHighLowtriIndicator;
private GannHighLowtri1 _gannHighLowtri1Indicator;
private GannHighLowtri2 _gannHighLowtri2Indicator;
private GannHighLowtri3 _gannHighLowtri3Indicator;
private GannHighLowWeight _gannHighLowWeightIndicator;
private GannHighLowWeight1 _gannHighLowWeight1Indicator;
private GannHighLowwws3 _gannHighLowwws3Indicator;
private GannHighLowTS _gannHighLowTSIndicator;
private GannHighLowTS1 _gannHighLowTS1Indicator;
private GHExp _GHExpIndicator;
private GHExp1 _GHExp1Indicator;
private GHLwwssma _GHLwwssmaIndicator;
private GHLwwssma1 _GHLwwssma1Indicator;
private MovingAverage MA1;
private MovingAverage MA2;
private MovingAverage MA3;
private MovingAverage MA4;
private MovingAverage MA5;
private MovingAverage MA6;
private MovingAverage MA7;
private MovingAverage MA8;
private MovingAverage MA10;
private MovingAverage MA11;
private MovingAverage MA20;
private MovingAverage MA21;
private MovingAverage MA30;
private MovingAverage MA31;
private Position _position;
private int a;
private int b;
[Parameter("Period-Buy", DefaultValue = 50)]
public int Period { get; set; }
[Parameter("Period1-Sell", DefaultValue = 61)]
public int Period1 { get; set; }
[Parameter("Period2-Sell", DefaultValue = 52)]
public int Period2 { get; set; }
[Parameter("Period3-Sell", DefaultValue = 44)]
public int Period3 { get; set; }
[Parameter("Period4-Sell", DefaultValue = 54)]
public int Period4 { get; set; }
[Parameter("Period5-Sell", DefaultValue = 45)]
public int Period5 { get; set; }
[Parameter("Period6-Sell", DefaultValue = 41)]
public int Period6 { get; set; }
[Parameter("Period7-Buy", DefaultValue = 50)]
public int Period7 { get; set; }
[Parameter("Period8-Sell", DefaultValue = 51)]
public int Period8 { get; set; }
[Parameter("Period9-Buy", DefaultValue = 26)]
public int Period9 { get; set; }
[Parameter("Period10-Sell", DefaultValue = 65)]
public int Period10 { get; set; }
[Parameter("Period11-Buy", DefaultValue = 49)]
public int Period11 { get; set; }
[Parameter("Period12-Sell", DefaultValue = 29)]
public int Period12 { get; set; }
[Parameter("Period13-Sell", DefaultValue = 21)]
public int Period13 { get; set; }
[Parameter("Period14-Buy", DefaultValue = 30)]
public int Period14 { get; set; }
[Parameter("Period15-Buy", DefaultValue = 24)]
public int Period15 { get; set; }
[Parameter("Period16-Sell", DefaultValue = 57)]
public int Period16 { get; set; }
[Parameter("Period17-Sell", DefaultValue = 50)]
public int Period17 { get; set; }
[Parameter("Volume-Buy", DefaultValue = 10000)]
public int Volume { get; set; }
[Parameter("Volume1-Sell", DefaultValue = 10000)]
public int Volume1 { get; set; }
[Parameter("StopLoss-Buy", DefaultValue = 60)]
public int StopLoss { get; set; }
[Parameter("StopLoss1-Sell", DefaultValue = 61)]
public int StopLoss1 { get; set; }
[Parameter("TakeProfit-Buy", DefaultValue = 162)]
public int TakeProfit { get; set; }
[Parameter("TakeProfit1-Sell", DefaultValue = 130)]
public int TakeProfit1 { get; set; }
[Parameter("MA_period1-Buy", DefaultValue = 60)]
public int MA_period1 { get; set; }
[Parameter("MA_period2-Buy", DefaultValue = 44)]
public int MA_period2 { get; set; }
[Parameter("MA_period3-Sell", DefaultValue = 58)]
public int MA_period3 { get; set; }
[Parameter("MA_period4-Sell", DefaultValue = 41)]
public int MA_period4 { get; set; }
[Parameter("MA_period5-Sell", DefaultValue = 75)]
public int MA_period5 { get; set; }
[Parameter("MA_period6-Sell", DefaultValue = 35)]
public int MA_period6 { get; set; }
[Parameter("MA_period7-Buy", DefaultValue = 26)]
public int MA_period7 { get; set; }
[Parameter("MA_period8-Buy", DefaultValue = 27)]
public int MA_period8 { get; set; }
[Parameter("MA_period10-Buy", DefaultValue = 65)]
public int MA_period10 { get; set; }
[Parameter("MA_period11-Buy", DefaultValue = 40)]
public int MA_period11 { get; set; }
[Parameter("MA_period20-Sell", DefaultValue = 54)]
public int MA_period20 { get; set; }
[Parameter("MA_period21-Sell", DefaultValue = 36)]
public int MA_period21 { get; set; }
[Parameter("MA_period30-Sell", DefaultValue = 60)]
public int MA_period30 { get; set; }
[Parameter("MA_period31-Sell", DefaultValue = 41)]
public int MA_period31 { get; set; }
[Parameter("Tral_Start-Buy", DefaultValue = 147)]
public int Tral_Start { get; set; }
[Parameter("Tral_Start1-Sell", DefaultValue = 205)]
public int Tral_Start1 { get; set; }
[Parameter("Tral_Stop-Buy", DefaultValue = 121)]
public int Tral_Stop { get; set; }
[Parameter("Tral_Stop1-Sell", DefaultValue = 167)]
public int Tral_Stop1 { get; set; }
[Parameter("MFI_period-Sell", DefaultValue = 19)]
public int MFI_period { get; set; }
[Parameter("MFI_period1-Sell", DefaultValue = 13)]
public int MFI_period1 { get; set; }
[Parameter("MFI_period2-Sell", DefaultValue = 9)]
public int MFI_period2 { get; set; }
[Parameter("MFI_period3-Buy", DefaultValue = 12)]
public int MFI_period3 { get; set; }
[Parameter("MO_period-Sell", DefaultValue = 23)]
public int MO_period { get; set; }
[Parameter("MO_period1-Buy", DefaultValue = 28)]
public int MO_period1 { get; set; }
[Parameter("MO_period2-Sell", DefaultValue = 25)]
public int MO_period2 { get; set; }
[Parameter("MO_period3-Buy", DefaultValue = 11)]
public int MO_period3 { get; set; }
[Parameter("MO_period4-Sell", DefaultValue = 26)]
public int MO_period4 { get; set; }
private ChaikinMoneyFlow MFI;
private ChaikinMoneyFlow MFI2;
private MoneyFlowIndex MFI3;
private MoneyFlowIndex MFI4;
private VerticalHorizontalFilter MO;
private VerticalHorizontalFilter MO1;
private MomentumOscillator MO3;
private MomentumOscillator MO4;
private MomentumOscillator MO5;
protected override void OnStart()
{
_GHLsmawwsIndicator = Indicators.GetIndicator<GHLsmawws>(Period);
_GHLsmawws2Indicator = Indicators.GetIndicator<GHLsmawws2>(Period1, Period2);
_gannHighLowwwsIndicator = Indicators.GetIndicator<GannHighLowwws>(Period3);
_gannHighLowwws1Indicator = Indicators.GetIndicator<GannHighLowwws1>(Period4);
_gannHighLowtriIndicator = Indicators.GetIndicator<GannHighLowtri>(Period5);
_gannHighLowWeightIndicator = Indicators.GetIndicator<GannHighLowWeight>(Period6);
_GHExpIndicator = Indicators.GetIndicator<GHExp>(Period7);
_GHExp1Indicator = Indicators.GetIndicator<GHExp1>(Period8);
_gannHighLowtri1Indicator = Indicators.GetIndicator<GannHighLowtri1>(Period9);
_gannHighLowWeight1Indicator = Indicators.GetIndicator<GannHighLowWeight1>(Period10);
_gannHighLowTSIndicator = Indicators.GetIndicator<GannHighLowTS>(Period11);
_gannHighLowTS1Indicator = Indicators.GetIndicator<GannHighLowTS1>(Period12);
_GHLwwssmaIndicator = Indicators.GetIndicator<GHLwwssma>(Period13);
_GHLwwssma1Indicator = Indicators.GetIndicator<GHLwwssma1>(Period14);
_gannHighLowtri2Indicator = Indicators.GetIndicator<GannHighLowtri2>(Period15);
_gannHighLowtri3Indicator = Indicators.GetIndicator<GannHighLowtri3>(Period16);
_gannHighLowwws3Indicator = Indicators.GetIndicator<GannHighLowwws3>(Period17);
MFI = Indicators.ChaikinMoneyFlow(MFI_period);
MFI2 = Indicators.ChaikinMoneyFlow(MFI_period1);
MFI3 = Indicators.MoneyFlowIndex(MFI_period2);
MFI4 = Indicators.MoneyFlowIndex(MFI_period3);
MO = Indicators.VerticalHorizontalFilter(MarketSeries.Close, MO_period);
MO1 = Indicators.VerticalHorizontalFilter(MarketSeries.Close, MO_period1);
MO3 = Indicators.MomentumOscillator(MarketSeries.Close, MO_period2);
MO4 = Indicators.MomentumOscillator(MarketSeries.Close, MO_period3);
MO5 = Indicators.MomentumOscillator(MarketSeries.Close, MO_period4);
MA1 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period1);
MA2 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period2);
MA3 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period3);
MA4 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period4);
MA5 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period5);
MA6 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period6);
MA7 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period7);
MA8 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period8);
MA10 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period10);
MA11 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period11);
MA20 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period20);
MA21 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period21);
MA30 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period30);
MA31 = Indicators.SimpleMovingAverage(MarketSeries.Close, MA_period31);
Print("Welcome to the world of infinite financial possibilities!");
}
protected override void OnPositionOpened(Position openedPosition)
{
_position = openedPosition;
if (_position.TradeType == TradeType.Buy)
{
Trade.ModifyPosition(openedPosition, _position.EntryPrice - StopLoss * Symbol.PipSize, _position.EntryPrice + TakeProfit * Symbol.PipSize);
Print("StopLoss and TakeProfit were successfully established");
}
if (_position.TradeType == TradeType.Sell)
{
Trade.ModifyPosition(openedPosition, _position.EntryPrice + StopLoss1 * Symbol.PipSize, _position.EntryPrice - TakeProfit1 * Symbol.PipSize);
Print("StopLoss and TakeProfit were successfully established");
}
}
protected override void OnBar()
{
double Bid = Symbol.Bid;
double Ask = Symbol.Ask;
double Point = Symbol.PointSize;
double MO2 = MO.Result[MO.Result.Count - 2];
double MFI1 = MFI.Result[MFI.Result.Count - 2];
if (Trade.IsExecuting)
return;
if (_GHLsmawwsIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO1.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO1.Result.IsRising() && MFI1 > 0.2 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO1.Result.IsRising() && MFI1 > 0.2 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI1 > 0.1 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO4.Result.IsRising() && MFI1 > 0.15 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MA7.Result.IsRising() && MO4.Result.IsRising() && MO2 > 0.3 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MA7.Result.IsRising() && MO4.Result.IsRising() && MFI1 > 0.05 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MA7.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.35 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawwsIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MA7.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.3 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHExpIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.35 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowtri1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowtri1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO1.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.3 && MFI1 > 0.15 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowtri1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MA8.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowtri1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MA8.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowTSIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowTSIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowTSIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.35 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowTSIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MFI1 > 0.05 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowTSIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO1.Result.IsRising() && MFI4.Result.IsRising() && MFI1 > 0.1 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLwwssma1Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA1.Result.IsRising() && MA2.Result.IsFalling() && MO4.Result.IsRising() && MFI4.Result.IsRising() && MO2 > 0.355 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_gannHighLowtri2Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA10.Result.IsRising() && MA11.Result.IsFalling() && MO1.Result.IsRising() && MFI1 > 0.15 && a == 0)
{
Trade.CreateBuyMarketOrder(Symbol, Volume1);
Print("Trade Buy was successfully open");
a = 1;
}
if (_GHLsmawws2Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO.Result.IsRising() && MFI.Result.IsFalling() && MO2 < 0.35 && MFI1 < 0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHLsmawws2Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO5.Result.IsFalling() && MFI.Result.IsFalling() && MO2 < 0.3 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwwsIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA20.Result.IsFalling() && MA21.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwws1Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI3.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwws1Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI3.Result.IsFalling() && MO2 < 0.3 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwws1Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA20.Result.IsFalling() && MA21.Result.IsRising() && MO3.Result.IsRising() && MFI3.Result.IsFalling() && MO2 < 0.3 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowtriIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowtriIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA20.Result.IsFalling() && MA21.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowtriIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.15 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowWeightIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MO2 < 0.25 && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowWeightIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MO2 < 0.2 && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHExp1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHExp1Indicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA30.Result.IsFalling() && MA31.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MO2 < 0.2 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHExp1Indicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MO2 < 0.25 && MFI1 < 0.0 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowWeight1Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO5.Result.IsFalling() && MFI2.Result.IsFalling() && MO2 < 0.3 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowWeight1Indicator.Result.HasCrossedBelow(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO5.Result.IsFalling() && MFI2.Result.IsFalling() && MO2 < 0.25 && MFI1 < -0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowWeight1Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO5.Result.IsFalling() && MFI2.Result.IsFalling() && MFI1 < -0.25 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowTS1Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO5.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.2 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowTS1Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA20.Result.IsFalling() && MA21.Result.IsRising() && MO5.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.2 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHLwwssmaIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHLwwssmaIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA30.Result.IsFalling() && MA31.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHLwwssmaIndicator.Result.HasCrossedBelow(MarketSeries.Open, 1) && MA20.Result.IsFalling() && MA21.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < -0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_GHLwwssmaIndicator.Result.HasCrossedAbove(MarketSeries.Open, 1) && MA5.Result.IsFalling() && MA6.Result.IsFalling() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MO2 < 0.35 && MFI1 < -0.25 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowtri3Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
if (_gannHighLowwws3Indicator.Result.HasCrossedAbove(MarketSeries.Close, 1) && MA3.Result.IsFalling() && MA4.Result.IsRising() && MO3.Result.IsRising() && MFI2.Result.IsFalling() && MFI1 < 0.05 && b == 0)
{
Trade.CreateSellMarketOrder(Symbol, Volume);
Print("Trade SELL was successfully open");
b = 1;
}
foreach (var position in Account.Positions)
{
if (position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TradeType.Buy)
{
if (Bid - position.EntryPrice >= Tral_Start * Point)
if (Bid - Tral_Stop * Point >= position.StopLoss)
Trade.ModifyPosition(position, Bid - Tral_Stop * Point, position.TakeProfit);
}
if (position.TradeType == TradeType.Sell)
{
if (position.EntryPrice - Ask >= Tral_Start1 * Point)
if (Ask + Tral_Stop1 * Point <= position.StopLoss)
Trade.ModifyPosition(position, Ask + Tral_Stop1 * Point, position.TakeProfit);
}
}
}
}
protected override void OnPositionClosed(Position pos)
{
a = 0;
b = 0;
}
protected override void OnStop()
{
Print("Successful day!");
}
}
}
MO
Mountain
Joined on 28.07.2018
- Distribution: Free
- Language: C#
- Trading platform: cTrader Automate
- File name: EURUSD2.algo
- Rating: 2.5
- Installs: 3089
- Modified: 13/10/2021 09:55
Warning! Running cBots downloaded from this section may lead to financial losses. Use them at your own risk.
Note that publishing copyrighted material is strictly prohibited. If you believe there is copyrighted material in this section, please use the Copyright Infringement Notification form to submit a claim.
Comments
Log in to add a comment.
Good work, but very few trades.
I have backtested it for an year monthly wise, and gives an average of 4 trades per month. I think to make money using it i will have to increase the lot size to 2k